Crochet Crown Beanie

By: Janaya Chouinard for allfreecrochet.com

By: Janaya Chouinard for allfreecrochet.com

Crochet the Crochet Crown Beanie and feel like royalty from the moment you put it on! This easy crochet beanie pattern is a quick work up and features two colors to really show off the crown points. Make one for your little one or for your best friend - just use your favorite colors to truly personalize it.

NotesNotes:
•Hat can be started with a Magic Ring or with the instructions given in Round 1
•Starting chain does NOT count as a stitch
•Each round is started in the same stitch as your starting chain
•The end of each round is joined by slip stitching in the first stitch of the round, not the starting chain
•For smaller hat sizes, you can stitch the crown in place so it doesn’t get pulled down over the eyes

Easy

Crochet HookH/8 or 5 mm hook

Yarn Weight(4) Medium Weight/Worsted Weight and Aran (16-20 stitches to 4 inches)

Crochet Gauge14 sts and 12 rows = 4” (10 cm)

Finished SizeNewborn to Adult

Materials List

Worsted weight yarn in Color A and Color B
5.0 mm (H-8) crochet hook
Yarn needle

Pattern

Newborn
Head Circumference = 13” - 14”
Hat Circumference = 12.5”
Height hat = 5”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, hdc in first 4 sts, *2 hdc in next st, hdc in next 3 sts* repeat around, join (44)
Round 6 - 14: Ch 1, hdc around, join (44) - Fasten off Color A after Round 14
Round 15: With Color B and the inside or wrong side of the hat facing you - Ch 1, hdc around, join (44)

Crown
Round 16: Working in Back Loops for this round only - Ch 1, sc around, join (44)
Round 17 - 18: Ch 1, sc around, join (44)
Round 19: Ch 1, hdc around, join (44)
Round 20: Ch 1, sc around, join (44)
Round 21: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 sc, picot, 2 sc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [3 dc, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Small Crown Point, sl st in the join from the last round and fasten off (11 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
0 - 3 Months
Head Circumference = 14.5” - 15.5”
Hat Circumference = 14”
Height hat = 5.25”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2hdc in first st, hdc in next 14* repeat around, join (48)
Round 7 - 15: Ch 1, hdc around, join (48) - Fasten off Color A after Round 15
Round 16: With Color B and the inside or wrong side of the hat facing you - Ch 1, sc around, join (48)

Crown
Round 17: Working in Back Loops for this round only - Ch 1, sc around, join (48)
Round 18 - 19: Ch 1, sc around, join (48)
Round 20: Ch 1, hdc around, join (48)
Round 21: Ch 1, sc around, join (48)
Round 22: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 sc, picot, 2 sc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [3 dc, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Large Crown Point, sl st in the join from last round and fasten off (12 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
3 - 6 Months
Head Circumference = 15.5” - 16.5”
Hat Circumference = 15”
Height hat = 5.5”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, hdc in first 3 sts, *2hdc in next st, hdc in next 5* repeat around, join (52)
Round 7 - 16: Ch 1, hdc around, join (52) - Fasten off Color A after Round 16
Round 17: With Color B and the inside or wrong side of the hat facing you - Ch 1, sc around, join (52)

Crown
Round 18: Working in Back Loops for this round only - Ch 1, sc around, join (52)
Round 19 - 20: Ch 1, sc around, join (52)
Round 21: Ch 1, hdc around, join (52)
Round 22: Ch 1, sc around, join (52)
Round 23: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 sc, picot, 2 sc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [3 dc, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Small Crown Point, sl st in the join from last round and fasten off (13 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
6 - 12 Months
Head Circumference = 16.5” - 17.5”
Hat Circumference = 16”
Height hat = 6”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2 hdc in first st, hdc in next 4 sts* repeat around, join (54)
Round 7: Ch 1, *2hdc in first st, hdc in next 26* repeat around, join (56)
Round 8 - 17: Ch 1, hdc around, join (56) - Fasten off Color A after Round 17
Round 18: With Color B and the inside or wrong side of the hat facing you - Ch 1, hdc around, join (56)

Crown
Round 19: Working in Back Loops for this round only - Ch 1, sc around, join (56)
Round 20 - 21: Ch 1, sc around, join (56)
Round 22: Ch 1, hdc around, join (56)
Round 23: Ch 1, sc around, join (56)
Round 24: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 sc, picot, 2 sc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [3 dc, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Large Crown Point, sl st in the join from last round and fasten off (14 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
Toddler (1 - 3 Years)
Head Circumference = 17.5” - 18.5”
Hat Circumference = 17”
Height hat = 6.5”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2 hdc in first st, hdc in next 4 sts* repeat around, join (54)
Round 7: Ch 1, *2hdc in first st, hdc in next 8* repeat around, join (60)
Round 8 - 19: Ch 1, hdc around, join (60) - Fasten off Color A after Round 19
Round 20: With Color B and the inside or wrong side of the hat facing you - Ch 1, sc around, join (60)

Crown
Round 21: Working in Back Loops for this round only - Ch 1, sc around, join (60)
Round 22 - 23: Ch 1, sc around, join (60)
Round 24: Ch 1, hdc around, join (60)
Round 25: Ch 1, sc around, join (60)
Round 26: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 sc, picot, 2 sc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [3 dc, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Small Crown Point, sl st in the join from last round and fasten off (15 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
Child (4 - 10 Years)
Head Circumference = 18.5” - 20”
Hat Circumference = 18.25”
Height hat = 7”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2 hdc in first st, hdc in next 4 sts* repeat around, join (54)
Round 7: Ch 1, *2 hdc in first st, hdc in next 5 sts* repeat around, join (63)
Round 8: Ch 1, 2 hdc in first st, hdc in each remaining st, join (64)
Round 9 - 20: Ch 1, hdc around, join (64) - Fasten off Color A after Round 20
Round 21: With Color B and the inside or wrong side of the hat facing you - Ch 1, hdc around, join (64)

Crown
Round 22: Working in Back Loops for this round only - Ch 1, sc around, join (64)
Round 23 - 25: Ch 1, sc around, join (64)
Round 26: Ch 1, hdc around, join (64)
Round 27: Ch 1, sc around, join (64)
Round 28: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 hdc, picot, 2 hdc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [2 dc, 1 htr, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Large Crown Point, sl st in the join from last round and fasten off (16 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
Teen / Small Adult
Head Circumference = 20” - 21”
Hat Circumference = 19.5”
Height hat = 7.25”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2 hdc in first st, hdc in next 4 sts* repeat around, join (54)
Round 7: Ch 1, *2 hdc in first st, hdc in next 5 sts* repeat around, join (63)
Round 8: Ch 1, hdc in first 3 sts, *2hdc in next st, hdc in next 11* repeat around, join (68)
Round 9 - 21: Ch 1, hdc around, join (68) - Fasten off Color A after Round 21
Round 22: With Color B and the inside or wrong side of the hat facing you - Ch 1, sc around, join (68)

Crown
Round 23: Working in Back Loops for this round only - Ch 1, sc around, join (68)
Round 24 - 26: Ch 1, sc around, join (68)
Round 27: Ch 1, hdc around, join (68)
Round 28: Ch 1, sc around, join (68)
Round 29: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 hdc, picot, 2 hdc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [2 dc, 1 htr, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Small Crown Point, sl st in the join from last round and fasten off (17 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
Adult
Head Circumference = 21.5” - 22.5”
Hat Circumference = 21”
Height hat = 7.5”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2 hdc in first st, hdc in next 4 sts* repeat around, join (54)
Round 7: Ch 1, *2 hdc in first st, hdc in next 5 sts* repeat around, join (63)
Round 8: Ch 1, *2 hdc in first st, hdc in next 6 sts* repeat around, join (72)
Round 9 - 22: Ch 1, hdc around, join (72) - Fasten off Color A after Round 22
Round 23: With Color B and the inside or wrong side of the hat facing you - Ch 1, sc around, join (72)

Crown
Round 24: Working in Back Loops for this round only - Ch 1, sc around, join (72)
Round 25 - 27: Ch 1, sc around, join (72)
Round 28: Ch 1, hdc around, join (72)
Round 29: Ch 1, sc around, join (72)
Round 30: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 hdc, picot, 2 hdc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [2 dc, 1 htr, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Large Crown Point, sl st in the join from last round and fasten off (18 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.
Large Adult
Head Circumference = 22.5” - 23.5”
Hat Circumference = 22”
Height hat = 7.9”

Round 1: With Color A - Ch 2, make 9 hdc in the 2nd chain from the hook, join in first hdc (9)
Round 2: Ch 1, 2 hdc in each st around, join (18)
Round 3: Ch 1, *2 hdc in first st, hdc in next st* repeat around, join (27)
Round 4: Ch 1, *2 hdc in first st, hdc in next 2 sts* repeat around, join (36)
Round 5: Ch 1, *2 hdc in first st, hdc in next 3 sts* repeat around, join (45)
Round 6: Ch 1, *2 hdc in first st, hdc in next 4 sts* repeat around, join (54)
Round 7: Ch 1, *2 hdc in first st, hdc in next 5 sts* repeat around, join (63)
Round 8: Ch 1, *2 hdc in first st, hdc in next 6 sts* repeat around, join (72)
Round 9: Ch 1, *2hdc in first st, hdc in next 17* repeat around, join (76)
Round 10 - 23: Ch 1, hdc around, join (76) - Fasten off Color A after Round 23
Round 24: With Color B and the inside or wrong side of the hat facing you - Ch 1, sc around, join (76)

Crown
Round 25: Working in Back Loops for this round only - Ch 1, sc around, join (76)
Round 26 - 28: Ch 1, sc around, join (76)
Round 29: Ch 1, hdc around, join (76)
Round 30: Ch 1, sc around, join (76)
Round 31: Alternate the following instructions to make small and large Crown Points around the hat.
Small Crown Point: Skip 1 st, in the next st make [3 hdc, picot, 2 hdc], sk 1 st, sl st in next;
Large Crown Point: Skip 1 st, in the next st make [2 dc, 1 htr, picot, 2 dc], sk 1 st, sl st in next;
Ending with a Small Crown Point, sl st in the join from last round and fasten off (19 Crown Points)
Flip the crown right side out along the Round that was worked into the back loops. Weave in ends.

Your Recently Viewed Projects

Rate

I have not made this yet so I cannot rate it.

We are adding your Comments.

Thank you! Your comment has been added.

We are sorry. There was an error tyring to post your rating and review.

Your comment will appear after our editors have had a chance to review it.

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

mulberrygalprinces s

Oct 29, 2017

This is just too much. It's a great pattern, easy, cute and all on the front page. I read thru the directions and the notes and they are basic. I recommend every one her extra notes before beginning this project. I have some sew on sequins to add to the crown to really give it the royal touch!