White Spider Lace Jacket
Even if you've never heard of spider lace crochet, you should check out this White Spider Lace Jacket. It's fun, versatile, and light enough for every season. This is definitely your next favorite crochet wearable because it'll match everything you own to wear to work, to dinner, and more. You don't even have to make it in white if that's not your color - any color would make this lace crochet jacket pattern work! Just take a look at the unique pattern this spider lace crochet makes and you'll be wanting more.
NotesNote:
1. Pattern is designed to be worn open in front and can be stretched to pin closed at top of bust. Fronts do not meet at center front. Pattern is worked in 3 panels that are joined together and then sleeves are worked directly onto sleeve openings.
Crochet HookD/3 or 3.25 mm hook
Yarn Weight(2) Fine (23-26 stitches to 4 inches)
Crochet GaugeRows 2-11 in side panel pattern = 5 (12.5 cm) wide x 4 (11.5 cm) deep; 20 sts sts and 10= rows in ldc = 4 (10 cm).
Finished SizeDirections are for size Small (S). Changes for sizes Medium (M), Large (L), X-Large (XL), 2X-Large (2X), and 3X-Large (3X) are in parentheses. To Fit Bust: 35 (37, 39, 41, 43, 45), [89 (94, 99, 104, 109, 114.5) cm].
Materials List
- RED HEART Luster Sheen: 4 (5, 5, 6, 6, 6) balls 7 Vanilla
- Susan Bates Crochet Hook: 3.25mm [US-D-3]
- Yarn needle
Special Stitches
-
Linked double crochet (ldc):
First ldc of row: Ch 3, insert hook in the 2nd chain from hook, yo and pull through loop, (2 loops on hook), insert hook in next st in row below, yo and pull through stitch (3 loops on hook), yo and pull through 2 loops (2 loops on hook), yo and pull through last 2 loops on hook.
Each Remaining ldc: Insert hook in horizontal bar on last ldc, yo and pull through loop, (2 loops on hook), insert hook in next st in row below, yo and pull through st (3 loops on hook), yo and pull through 2 loops (2 loops on hook), yo and pull through last 2 loops on hook. -
Front post single crochet (fpsc): Insert hook from front to back to front again, around the post of next st, yo, pull through st, yo and draw through 2 loops on hook.
-
Back post single crochet (bpsc): Insert hook from back to front to back again, around the post of next st, yo, pull through st, yo and draw through 2 loops on hook.
-
Shell: 3 dc in same st.
Side Panel (make 2)
-
Starting at bottom edge of fronts, ch 27.
-
Row 1 (right side): Shell in 6th ch from hook, (beginning ch 5 counts as first dc and 2 skipped ch sts], [skip next 2 ch, shell in next ch] twice, ch 13, skip next 5 ch sts, [shell in next ch, skip next 2 ch] 3 times, dc in last st, turn--2 dc; 6 shells; 1 ch-13 loop.
-
Row 2: Ch 3, (counts as dc here and throughout), dc in same st, [skip next shell, shell in space before next shell] twice, ch 6, sc in next ch-13 space, ch 6, skip next shell, [shell in space before next shell, skip next shell] twice, 2 dc in top of beginning ch-3, turn--4 dc; 4 shells; 1 sc; 2 ch-6 loops.
-
Row 3: Ch 3, skip next dc, shell in space before next shell, skip next shell, shell in space before next shell, ch 6, sc in next ch-6 space, sc in next sc, sc in next ch-6 space, ch 6, skip next shell, shell in space before next shell, skip next shell, shell in space before last 2 sts, dc in top of beginning ch-3, turn. 2 dc, 4 shells, 3 sc
-
Row 4: Ch 3, dc in same st, skip next shell, shell in space before next shell, ch 6, sc in next ch-6 space, sc in each of next 3 sts, sc in next ch-6 space, ch 6, skip next shell, shell in space before next shell, 2 dc in top of beginning ch-3, turn--4 dc; 2 shells; 5 sc; 2 ch-6 loops.
-
Row 5: Ch 3, skip next dc, shell in space before next shell, ch 6, sc in next ch-6 space, sc in each of next 5 sc, sc in next ch-6 space, ch 6, skip next shell, shell in space before last 2 sts, dc in top of beginning ch-3, turn--2 dc; 2 shells; 7 sc; 2 ch-6 loops.
-
Row 6: Ch 3, dc in same st, ch 6, sc in next ch-6 space, sc in each of next 7 sc, sc in next ch-6 space, ch 6, 2 dc in top of beginning ch- 3, turn-4 dc; 9 sc; 2 ch-6 loops.
-
Row 7: Ch 3, shell in next ch-6 space, ch 6, skip next sc, sc in each of next 7 sc, ch 6, shell in next ch-6 space, dc in top of beginning ch-3, turn--2 dc; 2 shells; 7 sc; 2 ch-6 loops.
-
Row 8: Ch 3, dc in same st, shell in next ch-6 space, ch 6, skip next sc, sc in each of next 5 sc, ch 6, shell in next ch-6 space, 2 dc in top of beginning ch-3, turn--4 dc; 2 shells; 5 sc; 2 ch-6 loops.
-
Row 9: Ch 3, skip next dc, shell in space before next shell, skip next shell, shell in next ch-6 space, ch 6, skip next sc, sc in each of next 3 sc, ch 6, shell in next ch-6 space, skip next shell, shell in space before last 2 sts, dc in top of beginning ch-3, turn--2 dc; 4 shells; 3 sc; 2 ch-6 loops.
-
Row 10: Ch 3, dc in same st, skip next shell, shell in space before next shell, shell in next ch-6 space, ch 6, skip next sc, sc in next sc, ch 6, shell in next ch-6 space, skip next shell, shell in space before next shell, 2 dc in top of beginning ch-3, turn--4 dc; 4 shells; 1 sc; 2 ch-6 loops.
-
Row 11: Ch 3, skip next dc, [shell in space before next shell, skip next shell] twice, shell in next ch-6 space, ch 13, shell in next ch-6 space, skip next shell, shell in space before next shell, skip next shell, shell in space before last 2 sts, dc in top of beginning ch-3, turn--2 dc; 6 shells; 1 ch-13 loop.
-
Rows 12-91: Repeat Rows 2-11 eight times.
-
Rows 92-100: Repeat Rows 2-10.
-
Row 101: Ch 3, skip next dc, [shell in space before next shell, skip next shell] twice, shell in next ch-6 space, ch 6, shell in next ch-6 space, skip next shell, shell in space before next shell, skip next shell, shell in space before last 2 sts, dc in top of beginning ch- 3--2 dc; 6 shell; 1 ch-6 loop. Fasten off.
Underarm Panel
-
Place a marker at each end of rows 35 and 66 on each panel. With right side facing, join in bottom right-hand corner of one Side Panel to begin Underarm Panel.
-
Row 1 (right side): Ch 3 (counts as first ldc), work 69 ldc evenly spaced across to next marker, turn--70 ldc.
-
Rows 2-8 (10, 12, 14, 16, 20): Ch 3, ldc in each st across, turn. Fasten off. Repeat Underarm Panel across right side edge of other Side Panel.
Center Back Panel
-
Starting at back bottom edge, ch 27. Work same as Side Panel through row 40.
-
Row 41: Repeat Row 101 of Side Panel. Do not fasten off.
Side Edging
-
Row 1 (right side): Ch 3, work 84 ldc evenly spaced across side edge of Back Panel, turn--85 ldc. Fasten off size S only.
-
Sizes M (L, XL, 2X and 3X) only
Rows 2 (2-3, 2-3, 2-4, 2-4): Ch 3, ldc in each st across, turn. Fasten off.
Assembly
Fold each side panel in half. Whipstitch last row of Underarm Panel to corresponding rows of top half of same Side Panel. Repeat on other Side Panel. With bottom edges aligned, whipstitch Center Back Panel to inside edges of Side Panels.
Sleeve
-
Round 1 (right side): With right side facing, join yarn with sc in center bottom of armhole (on top edge of Underarm Panel), ch 3, *skip space of one st, sc in edge of armhole opening, ch 3; repeat 24 (24, 25, 26, 28, 30) times evenly spaced around entire armhole opening, do not join. Work in a spiral, marking beginning of each round, moving marker up as work progresses.
-
Rounds 2-20: [Ch 3, sc] in each ch-3 space around.
-
Round 21: Work 72 (72, 76, 80, 84, 92) sc evenly spaced around.
-
Rounds 22-24: *fpsc around each of next 2 sc, bpsc around each of next 2 sc; repeat from * around. At end of last round, slip st in next fpsc to join. Fasten off.
Sweater Trim
-
With wrong side facing, join yarn in bottom left-hand corner of left front edge.
-
Row 1 (wrong side): Ch 3, work 244 ldc evenly spaced across left front, across back neck and down right front edges to bottom right-hand corner st on right front, turn.
-
Row 2: Ch 3, 2 dc in first st, *skip next 3 sts, shell in next st; repeat from * across, turn--62 shells.
-
Row 3: Ch 1, sc in each st across, turn. Do not fasten off. Work now progresses in rounds.
Ribbing
-
Round 1 (right side): Ch 1, 2 sc in each of first 2 sts, sc in each st across to within 2 sts of next corner, 2 sc in each of first 2 sts, work 251 (257, 265, 273, 281, 289) sc evenly spaced across bottom edge, do not join--500 [506, 514, 522, 526, 534] sc. Work in a spiral, marking beginning of each round, moving marker up as work progresses.
-
Round 2-4: *Fpsc around each of next 2 sc, bpsc around each of next 2 sc; repeat from * around. At end of last round, slip st in next fpsc to join. Fasten off
-
Weave in ends.