menu

Snowman Wall Hanging

Comments

Snowman Wall Hanging

This jolly fellow would be great hanging on the front door to welcome friends, or just as a decorative wall hanging in the home. The Snowman Wall Hanging is an easy crochet pattern that helps you create your own flat snowman motif. You'll be working with multiple colors, both within the same piece and for separate pieces to sew together at the end, so if you're worried about color changes, don't be - this is an easy enough pattern to practice on. Hang this friendly crochet snowman on your front door or anywhere in your home to add a little bit of extra holiday cheer to your home this season.

NotesNotes:
-If a round or row has a beginning chain, it does not count as a stitch.
-Unless directed otherwise, rounds are worked in a spiral; use a stitch marker to track the first stitch of each round.

Crochet HookI/9 or 5.5 mm hook

Yarn Weight(4) Medium Weight/Worsted Weight and Aran (16-20 stitches to 4 inches)

Crochet GaugeGauge in SC: 13 sts and 14 rows = 4" (10 cm)

Finished Size9" wide by 20" tall

Materials List

  • Red Heart With Love worsted weight yarn in: White, Holly, Berry, Black, Mango
  • 5.5 mm (I-9) crochet hook or size needed to obtain the gauge
  • 1" Black buttons (2)
  • ½” Black buttons (5)
  • Poly fiber fill (optional)
  • Stitch markers
  • Yarn needle

Pattern

 

Top Hat

 

  1. Round 1: With Black - Ch 15, sc in 2nd ch from hook, sc in next 12 chs, make 2 sc in last ch. Working the other side of the chain: sc in next 13 chs, do not join (28)

  2. Round 2: Sc in each st around (28)

  3. Round 3: *Sc2tog, sc in next 12 sts* 2 times (26)

  4. Round 4 - 13: Sc in each st around (26)

  5. Secure the working loop of Black. Join Red in first stitch.
    Round 14: With Red - Ch 1, sc in each st around, do not join (26)

  6. Round 15: Sc in each st around, sl st first st, fasten off (26)
    Continue with Black yarn from Round 13.

  7. Round 16: With Black - *Sc in first st, make 2 sc in next st*, repeat between * around, do not join (39)

  8. Round 17: *Sc in first 2 sts, make 2 sc in next st*, repeat between * around, do not join (52)

  9. Round 18: Sc in each st around, do not join (52)

  10. Round 19: Ch 1, hdc in each stitch around, sl st to join in first hdc (52) Fasten off, leaving a lengthy tail for sewing.

Nose

 

  1. Row 1: With Mango - Ch 11, sl st in 2nd ch from hook, sc in next 3 chs, hdc in next 3 chs, dc in last 3 chs, turn (10)

  2. Row 2: Ch 2, dc in first st, dc in next 4 sts, sc in next 3 sts, sl st in last 2 sts (10)
    Fasten off, leaving a lengthy tail for sewing.

Head

Make 2

  1. Round 1: With White - Ch 2, make 6 sc in the 2nd ch from hook, do not join (6)

  2. Round 2: Make 2 sc in each st around (12)

  3. Round 3: *Sc in first st, make 2 sc in next st*, repeat around (18)

  4. Round 4: *Sc in first 2 sts, make 2 sc in next st*, repeat around (24)

  5. Round 5: *Sc in first 3 sts, make 2 sc in next st*, repeat around (30)

  6. Round 6: *Sc in first 4 sts, make 2 sc in next st*, repeat around (36)

  7. Round 7: *Sc in first 5 sts, make 2 sc in next st*, repeat around (42)

  8. Round 8: *Sc in first 6 sts, make 2 sc in next st*, repeat around (48)

  9. Round 9: *Sc in first 7 sts, make 2 sc in next st*, repeat around (54)

  10. Round 10: *Sc in first 8 sts, make 2 sc in next st*, repeat around (60)

  11. Round 11: *Sc in first 9 sts, make 2 sc in next st*, repeat around (66)

  12. Round 12: *Sc in first 10 sts, make 2 sc in next st*, repeat around (72)

  13. Round 13: *Sc in first 11 sts, make 2 sc in next st*, repeat around (78)

  14. The increases on the next two rounds are staggered to give the circle a more rounded shape.
    Round 14: Sc in first 4 sts, *make 2 sc in next st, sc in next 12 sts*, repeat between * around (84) - Your last repeat section will end with 8 sts instead of 12.

  15. Round 15: Sc in first 8 sts, *make 2 sc in next st, sc in next 13 sts*, repeat between * around (90) - Your last repeat section will end with 5 sts instead of 13.

  16. Head Piece # 1: Sl st in next st and fasten off.
    At this point, I pinned the hat in place at the top of Piece # 1 so I could configure the placement of the eyes, nose and mouth. I then sewed the face parts only in place before continuing with Head Piece # 2.

  17. Head Piece # 2: Do not fasten off. With wrong sides facing, hold piece # 1 and piece # 2 together. Working through both layers of the outer round: Sc in each stitch back to start, join in first sc. If preferred, you can lightly stuff the head with poly fiber fill before sealing it up completely. Fasten off.

  18. You can now sew the hat on top of the head. Place the seamed head pieces between the two brim layers of the hat and use the hat tail to sew through all 4 layers, going across the whole length of the brim.

Neck Scarf

 

  1. Mark the bottom 25 stitches of the head, as shown.

  2. Turn your work so the stitch markers are at the top. With the right side of the Snowman facing you, slip stitch to join Color Red in the Front Loop only of marked stitch A. The first round will be worked in the front loops only across to Marker B, then the piece is turned and you will work in the back loops only of the same stitches back to Marker A.

  3. Round 1: Ch 1, working in Front Loops only, sc in same st, sc in next 3 sts, make 2 sc in next st, *sc in next 4 sts, make 2 sc in next st*, repeat between * to marked stitch B. Turn your work and continue working in the un-used Back Loops only: repeat the instructions between * back to start, do not join (60)

  4. Round 2: Hdc in first 8 sts, sc in next 14 sts, hdc in next 16 sts, sc in next 14 sts, hdc in last 8 sts, do not join (60)

  5. Round 3: Hdc in first 7 sts, sc in next 16 sts, hdc in next 14 sts, sc in next 16 sts, hdc in last 7 sts, do not join (60)

  6. Round 4: Hdc in first 6 sts, sc in next 18 sts, hdc in next 12 sts, sc in next 18 sts, hdc in last 6 sts, do not join (60)

  7. Round 5: Sc in each stitch around, do not join (60)

  8. Round 6 and 7: Repeat Round 5

  9. The next row of SC stitches will be worked through both layers to seam the bottom of the scarf.

  10. Row 8: Sl st in next st to move your starting position. Ch 1, sc across, fasten off (30)

Dangling Scarf Piece

This piece is worked in a tube. Do not join the rounds. Leave a lengthy beginning tail for sewing.

  1. Round 1: Ch 21, sc in 2nd ch from hook, and in each chain to end, bring the ends together and sl st in first sc to form a ring (20)

  2. Round 2: Ch 1, sc in each stitch around, do not join (20)

  3. Repeat Round 2 until tube measures approximately 5" in length.

  4. Final Row: Working through both layers, sc across the bottom edge of the piece to close the end (10)

  5. Fasten off. Center the un-seamed edge over the neck scarf, just below the snowman's chin and sew in place using the beginning tail.

  6. Scarf Fringe: ​Cut 20 pieces of yarn that are each 5" in length. Use 2 pieces of yarn per stitch to add fringe along the bottom edge of the scarf. Trim the ends to an even length.

Up Next

More Christmas Crochet Patterns

close

Main Menu

Categories